The DDRescue command is a very versatile data recovery tool that can work well with almost any of the famous operating systems i.e. Linux, macOS, and Windows. It is very common for the drives in your system to get corrupted because of several reasons. In this situation, it becomes of utmost importance that you recover your data on a priority basis. Therefore, you must have a relevant tool for it. In this guide, we will learn to install the DDRescue command on a Linux Mint 21 system.
The Package inside which the DDRescue Command Resides:
The DDRescue command cannot be installed directly on a Linux Mint 21 system. It is so because this command resides inside a package known as GDDRescue. Therefore, in the method discussed in this article, we will basically be installing the GDDRescue package on our system so that we can enable ourselves to use the DDRescue command on it.
What is the Purpose of the DDRescue Command?
We have briefly explained the purpose of the DDRescue command in the introduction of our article. However, to elaborate on it, we would like to mention that this command is used to clone the data from one drive partition to another in case of the failure or corruption of the former one. In this way, this command helps you in saving your precious data.
Installation of the DDRescue Command on Linux Mint 21:
To install the DDRescue command on Linux Mint 21, you need to proceed as explained in the steps below:
Step # 1: Perform the System Update:
We will begin by performing a thorough system update by running the following command:
sudo apt update
This command will simply resolve all the dependency issues that can possibly cause problems for us in the future.
Step # 2: Install the GDDRescue Package on Linux Mint 21:
Then, as we have already mentioned that the DDRescue command resides inside the GDDRescue package, therefore, to be able to use that command, you will have to install this package. To install this package on your Linux Mint 21 system, you need to run the command shown below:
sudo apt install gddrescue
This command will install the GDDRescue package on your system after which you will conveniently be able to use the DDRescue command on your Linux Mint 21 system.
Step # 3: Check the Help Manual of the DDRescue Command on Linux Mint 21:
Now, before you can get started with the DDRescue command on your Linux Mint 21 system, it is good to take a look at its help manual by executing the following command:
From the help manual shown in the image below, you will instantly be able to find out how the DDRescue command works on a Linux Mint 21 system.
Removal of the DDRescue Command from Linux Mint 21:
The removal of the DDRescue command from a Linux Mint 21 system will only take place if you will remove the GDDRescue package from your system. You can do that by running the command shown below:
sudo apt-get purge --autoremove gddrescue
This command will remove the GDDRescue package along with the DDRescue command from your Linux Mint 21 system.
With the help of this article, we wanted to enable our readers to install the DDRescue command on their Linux Mint 21 systems. We first talked a little bit about this command followed by sharing the name of the package inside which this command resides. After that, we discussed the detailed purpose of the DDRescue command. Then, we moved straight on to the installation of this command or the package inside which it resides on a Linux Mint 21 system. Moreover, we also shared with you the command with which you can remove this package from your system hence removing the DDRescue command from it.